Glossary
A
Auto configure Device settings feature that queries a printing system through the
network and automatically retrieves settings for optional devices, memory, and RAM
disk. Driver settings will be updated with information received from the physical
printing system. Installed devices will be displayed in the Preview image.
B
Booklet Layout feature that prints a multi-page document in a booklet format by
using a duplex unit. Two pages are printed on each side of a sheet to create a
document that can be read like a book.
C
Cassette A removable plastic tray that holds a supply of paper for input to the
printer.
D
dpi Dots per (linear) inch. Measurement that describes the sharpness and clarity of
printed text and images. The higher the dpi, the more detail there is in the printed
output.
E
EcoPrint Imaging feature that changes toner saturation, making the entire image,
text and graphics, appear lighter in the printed job. The actual amount of toner used
depends on the printing system mode and the type of data printed (text, graphics, or
both). EcoPrint does not increase print speed. This feature is also available in the
Quick Print and Basic tabs.
Enable client profile Client profile refers to profile settings saved on a server and
accessed by clients in a client/server environment. This feature in the Advanced tab
enables an administrator to control and distribute profiles.
G
GDI compatible mode A page description language option that accurately
reproduces what is viewed on the screen using the Microsoft Graphical Device
Interface (GDI) component to render the document. It generates data in a raster
printing format, creating a larger printable file.
Gutter Blank space on the left side or top of a printed page that can be increased
by scaling down text and graphics. This supports stapling and hole punching. When
used with Duplex printing, the enlarged blank space lines up evenly on both sides of
the sheet. The larger blank space is created by shifting the printable area to the right
or down as much as one inch (25.4 mm).
H
Halftone screen Imaging process that breaks down an image into dots. An
experienced user can adjust Halftone screen settings to create shades of gray in
graphic images. Larger dots spaced close together create darker shades, and smaller
dots spaced farther apart create lighter shades. Shading can be varied by adjusting
the number of rows of dots, the angle at which rows of dots are placed, and the shape
of the dots.
K
Kyocera image refinement (KIR) Imaging feature that refines the edges of text
and vector graphics.
User Guide
iv
To Next Page
Loading...
Need help?
General
Weight and Dimensions
