Using the Operation Panel
2-56
8
To exit the menu selection, press [Menu].
Duplex Printing
You can automatically print on both sides of the paper.
Duplex printing is available for the following paper types:
Plain
Preprinted
Bond
Recycled
Rough
Letterhead
Color
Prepunched
High quality
Custom 1 (to 8)
When duplex printing is done, select either short edge or long edge binding mode.
NOTE: Duplex printing can be also performed from the MP tray. When the MP tray is set to First
Mode (First), the paper size and paper type will be the same as those of the paper cassette
currently set at the paper feed source. If the paper to be fed from the MP tray does not match the
paper size and paper type of the current paper feed source cassette, a paper jam may occur.
Binding Modes
Binding refers to the manner in which printed pages of paper are joined together (by gluing,
stitching, etc.) in book form. The two possible types of binding are: long-edge binding, in which
pages are joined together along their long edge; and short-edge binding, in which they are joined
together along their short edge. In selecting a binding type, you must also consider the orientation of
the printed page. You can use long-edge or short-edge binding with either landscape or portrait
printing.
Depending on the binding type and print orientation, the duplex unit provides four types of binding.
Portrait, long-edge
Landscape, long-edge
Portrait, short-edge
Landscape, short-edge
To Next Page
Loading...
Need help?
General