Using the Operation Panel
2-63
Selecting Monochrome or Color Printing
You can use the Color Mode menu on the operation panel to select the Monochrome or Color
printing mode. By default, the printer is set to print in color mode.
1
Press [Menu].
2
Press or repeatedly until Color Mode appears.
3
To change color mode, press [OK]. A blinking question mark (?)
appears.
4
Press or to change color mode — Color or Monochrome.
5
When the desired color mode is displayed, press [OK]. Color mode is changed.
6
To exit the menu selection, press [Menu].
Color Mode
Color
Color Mode
? Color
To Next Page
Loading...
Need help?
General