Kyocera Jax User Manual

54 Call a Contact
13 Voice Commands
You can do certain commands through voice
recognition. To control the settings associated
with voice commands, see “Voice dialing” on
page 23.
Call a Contact
1. From the home screen, press and hold
the
Send key. The phone prompts, “Say
a command”.
2. Say “Contact” and then name of the person
you want to call.
The phone prompts, “Please repeat” or “Say
a name” if it does not recognize the name. If
the name you spoke matches a contact in the
voice dial list, the phone prompts: “Name,
correct?” Say “Yes” to make the call, “No” to
select a similar name, or “Cancel” to cancel
the phone call.
If the phone finds multiple voice tags that
sound like the name you said, the phone will
list the names, you will be asked to verify
which name you want to call. Say “Yes” when
you hear the correct name. Say “No” when
you hear an incorrect name.
3. Press the End key to end the call.
To modify your voice dial list, see “Enable Voice
Dial Tags” on page 33.
Call a Number
1. From the home screen, press and hold
the
Send key. The phone prompts, “Say
a command”.
2. Say “Dial Number” and then speak the digits
of the number you want to call. If you pause,
the phone prompts you, “Did you say
<number>” or “Say a number” if it does not
recognize the name. Say “Yes” to make the
call, “No” to cancel the phone call.
3. Press the End key to end the call.
Find a Contact
1. From the home screen, press and hold the
Send key. The phone prompts, “Say
a command”.
2. Say “Find Contacts”. The phone prompts,
“Say a name”.
The phone prompts, “Please repeat” or “Say a
name” if it does not recognize the name. If the
name you spoke matches a contact in the voice
dial list, the phone prompts: “Name, correct?” Say
“Yes” to display the contact, “No” to select a
similar name, or “Cancel” to cancel the search.
Note: You can only search for contacts that are in
the voice dial list.

Kyocera Jax Specifications

General

Brand	Kyocera
Model	Jax
Category	Cell Phone
Language	English