Kyocera KM-1620 User Manual

Section 4 BASIC OPERATION
4-7
Pressing the [Energy Saver] key will put the copier into a resting
state even when the Power Switch is ON. The No. of Copies display
on the Operation Panel will change to “- - -”, the Conserve Power
indicator will light up and all other indicators will be turned off.
Press any key on the Operation Panel or open and close the
Original Cover in order to resume copying operations. In the case
where the optional Document Processor is installed, placing an
original in the Document Processor will also revert the copier to the
state where copies can be made. The recovery time before copies
can be made is within 10 seconds.
Note
A function to automatically enter the Low Power Mode
after a set interval in which no copies have been
produced has passed is also included. (Refer to P.6-14
"Exposure Steps".)
Low Power Mode

Kyocera KM-1620 Specifications

General

Time to first page (black, normal)	5.9 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Internal memory	32 MB
Maximum internal memory	160 MB
Custom media sizes	98x147 - 297x432 (mm)
Maximum print size	A3 (297 x 420 mm)
Standard media sizes	A3, A4, A5, Ledger, Letter, Legal, Folio
Zoom capability	50 - 200%
Maximum number of copies	250 copies
Copy speed (black, normal quality, A4)	16 cpm
Standard input capacity	300 sheets
Grayscale levels	256
Type	Digital copier
Dimensions (WxDxH)	574 x 552 x 502 mm
Number of print cartridges	1
Recommended media weight	45 - 160 g/m²
Compatible ink types, supplies	TK-410
Maximum duty cycle	20000 pages per month
Power requirements	220-240V, 50/60 Hz
Power consumption (standby)	88 W
Power consumption (typical)	356 W
Certification	GS TUV CE ISO 9001 ISO 14001

Weight and Dimensions

Weight	39000 g