5-14
Operation on the Machine > Application
4 Select [Yes].
Installation of the application begins. Depending on the application being installed, the
installation may take some time.
Once the installation ends, the original screen reappears.
Activating Applications
1
Display the screen.
[System Menu/Counter] key > [Application]
2
Activate the application.
1 Select the desired application > [Activate]
You can view detailed information on the selected application by selecting [Detail].
2 Enter the license key > [Official]
Some applications do not require you to enter a license key. If the license key entry screen
does not appear, go to step 3-3. To use the application as a trial, select [Trial] without
entering the license key.
3 Select [Yes].
• To install another application, repeat steps 2-3 and 2-4.
• To remove the removable memory, select [Remove Memory] and wait until the
message "Removable Memory can be safely removed." appears. Then remove the
removable memory.
If the user authentication screen appears, enter your login user name and login password
and select [Login]. For this, you need to login with administrator privileges. The factory
default login user name and login password are set as shown below.
• If you change the date/time while using the trial version of an application, you
will no longer be able to use the application.
• Icons of activated application are displayed in the Home screen.
Model Name Login User Name Login Password
2552ci 2500 2500
3252ci 3200 3200
4052ci 4000 4000
5052ci 5000 5000
6052ci 6000 6000