9-8
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Adding a User (Local User List)
You can add up to 100 users (including the default login user name).
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "Local User List" [Add/Edit]
2
Enter the user information.
[Add] > Enter the user information > [OK]
By default, one of each default user with machine administrator rights and administrator privileges is already stored.
Each user's properties are:
Machine Administrator
User Name: DeviceAdmin
Login User Name: 2552ci: 2500, 3252ci: 3200, 4052ci: 4000, 5052ci: 5000, 6052ci: 6000
Login Password: 2552ci: 2500, 3252ci: 3200, 4052ci: 4000, 5052ci: 5000, 6052ci: 6000
Access Level: Machine Administrator
Administrator
User Name: Admin
Login User Name: Admin
Login Password: Admin
Access Level: Administrator
* Upper case and lower case letters are distinguished (case sensitive).
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Item Descriptions
User Name Enter the name displayed on the user list (up to 32 characters).
Login User
Name
Enter the login user name to login (up to 64 characters). The same
login user name cannot be registered.
Model Name Login User Name Login Password
2552ci 2500 2500
3252ci 3200 3200
4052ci 4000 4000
5052ci 5000 5000
6052ci 6000 6000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
