14: Advanced Settings
EDS1100/2100 Device Server User Guide 127
Command Line Interface Settings
The Command Line Interface (CLI) web page enables you to view statistics about the CLI servers
listening on the Telnet and SSH ports and to configure CLI settings.
CLI Statistics
This read-only page shows the
current connection status of the CLI
servers listening on the Telnet and
SSH ports. When a connection is
active, the following display:
Remote client information
Number of bytes that have been
sent and received
A Kill link to terminate the
connection
To view the CLI Statistics:
1. Select CLI on the menu bar.
The Command Line Interface
Statistics page appears.
CLI Configuration
On this page you can change CLI settings.
To configure the CLI:
1. Select CLI on the menu and then Configuration at the top of the page. The Command Line
Interface Configuration page appears.
Figure 14-4 CLI Configuration
Figure 14-3 CLI Statistics
To Next Page
Loading...
Need help?
General