Lantronix UDS1100 User Manual

1
1
:
:
U
U
s
s
i
i
n
n
g
g
T
T
h
h
i
i
s
s
G
G
u
u
i
i
d
d
e
e
Purpose and Audience
This guide provides the information needed to configure, use, and update the
UDS1100 device server. It is for system administrators and those responsible for
installing and maintaining the UDS.
Chapter Summary
The remaining chapters in this guide include:
2: Introduction
Describes the main features of the UDS and the protocols it
supports.
3: Getting Started
Provides information for installing your unit and getting it up and
running using DeviceInstaller or a serial port connection.
4: Configuration Using Web-
Manager
Details using the Web-Manager to set parameters such as port
and server properties.
5: Configuration via Telnet or
Serial Port (Setup Mode
Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port.
6: Setup Mode: Server
Configuration
Details the network (server) settings
7: Setup Mode: Channel
Configuration
Details the serial port settings.
8: Setup Mode: Advanced
Settings
Details expert and security settings and explains how to reset
the unit to factory default values.
9: Firmware Upgrades
Provides instructions for obtaining the latest firmware and
updating the UDS.
10: Monitor Mode
Provides instructions for accessing and using the command line
interface to monitor the network and diagnose problems.
11: Troubleshooting and Contact
Information
Describes common problems and error messages and how to
contact Lantronix Technical Support.
12:Connections and Pinouts
Provides descriptions and illustrations of connection hardware.
13: Mounting Brackets
Provides drawings and dimensions of the unit's mounting
brackets.
13:Technical Specifications
Lists technical specifications for the UDS.
B: Alternative Ways to Assign an
Provides detailed information about using DHCP, AutoIP,
UDS1100 User Guide 8

Lantronix UDS1100 Specifications

General

Isolation	1.5 kV
Certification	UL, CSA, FCC, CE, TUV, CTick, VCC, UL 864 RoHS
Serial interface type	RS-232/422/485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Electrostatic Discharge (ESD) protection	15 kV
Cabling technology	10/100Base-T(X)
USB 2.0 ports quantity	0
Supported network protocols	ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP
Built-in processor	Lantronix DSTNI-EX
Processor frequency	48 MHz
Compatible operating systems	Windows 98/ME/NT/2000/XP
Flash memory	2 MB
RAM capacity	0.256 MB
LED indicators	LAN
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	100 - 240 V

Weight and Dimensions

Weight	400 g
Dimensions (WxDxH)	72 x 23 x 95 mm