LeCroy WaveAce series User Manual

Getting Started Manual
WA-GSM-E RevB
18
Figure 4-4. Back and Side panel connection locations on the 2 Channel WaveAce
Oscilloscope.
Previously numbered front panel buttons and knob locations for the 2
channel model correspond with the following explanations.
1. Pass/Fail Output
2. RS-232 Connector
3. Back USB Connector
4. Power Input Connector
Basic Controls
Powering Up Your WaveAce
1. Power On the oscilloscope by pressing the power button (located on
the lower front of the 4 channel version and top left on the 2
channel version, when facing the instrument).

LeCroy WaveAce series Specifications

General

Brand	LeCroy
Model	WaveAce series
Category	Test Equipment
Language	English