You have to set the Back USB option on the Utility menu to
Computer if you want to save bitmap pictures or Printer if you want
to print the pictures.
The Recall option is excluded from Save/Recall menus when Picture
or CSV is selected as the Type.
The Load option is disabled (grayed-out) on menus inside the SAVE
ALL screen when Pictures or CSV file types are selected as Type.
Recalling Factory Settings
The oscilloscope is set up for normal operation when it is shipped from the
factory.
Load factory settings by pressing the Default Setup front panel button.
You can also load the default setup from the Save/Recall menu by pressing
the Save/Recall front panel button. The SAVE/REC flyout menu opens.
Press the Type option button and select Factory.
Press the Load option button.
To Next Page
Loading...
Need help?
General
