9-3GPS1200
Coding
9.1.1 Thematical Coding with Codelist
)
Thematical coding of points with a codelist is explained in this chapter.
Requirements • The job codelist contains thematical codes.
• <Thematc Codes: With Codelist> in CONFIGURE Coding Settings.
• A display mask with an input field for point codes must be configured.
Access Open the choicelist for <Point Code:> in a display mask of an application program
to access XX Select Point Code.
XX
Select Point Code
All point codes from the job codelist which belong to the active code groups are avail-
able for selection. Point codes marked with have attributes attached.
To Next Page
Loading...
Need help?
General
