Coding GPS1200 9-8
9.1.2 Thematical Coding without Codelist
)
Thematical coding without codelist for points is explained in this chapter.
Requirements • <Thematc Codes: Without Codelist> in CONFIGURE Coding Settings.
• A display mask with an input field for point codes must be configured.
)
Thematical coding in the Survey application program is explained. A typical config-
uration set with a display mask for coding called Code is used.
Access A thematical code is typed in the field <Point Code:> in a display mask of an appli-
cation program.
SURVEY
Survey: Job Name,
Code page
The identifier for the point, the name for the code and the attribute values can be
typed in.
To Next Page
Loading...
Need help?
General
