Lenze EPM-H502 User Manual

Technical data
General data and operating conditions
2

56
EDBPM−H502 DE/EN/FR 5.1
2 Technical data
2.1 General data and operating conditions
General data
Conformity and approval
Conformity
CE 2004/108/EC EMC Directive
Approval
UL cULus Underwriter Laboratories Inc. (File no. E189179)
Protection of persons and equipment
Enclosure
IP65 (front)
EMC
Applied standards for
limit values
EN 61000−6−4
(2007)
Noise emission. Restriction of use: Protection
requirements are not ensured in residential areas.
EN 61000−6−2
(2005)
Noise immunity. Restriction of use: Protection
requirements are not ensured in residential areas.
Operating conditions
Ambient conditions
Climate
Storage −20 ... +60 °C
Transport −20 ... +60 °C
Operation 0 ... +50 °C
Humidity
<85 %, without condensation
Mounting conditions
Weight 0.5 kg

Lenze EPM-H502 Specifications

General

Brand	Lenze
Model	EPM-H502
Category	Control Unit
Language	English

Summary

Document history

1 Preface and general information

2 Technical data

2.1 General data and operating conditions

Provides general specifications, conformity approvals, protection, and environmental operating conditions.

2.2 Electrical data

Details electrical specifications including display, connections, network, memory, and interfaces.

3 Mechanical installation

4 Electrical installation

4.1 Supply voltage connection

Details how to connect the DC supply voltage to the operating unit safely.

4.2 Wiring of the system bus (CAN)

Explains the principle structure and connection for the system bus (CAN).

5 Commissioning

5.2 Project transfer to the operating unit

Outlines the process for transferring a project from a PC to the operating unit.

6 Operation

6.2 Data input

Provides step-by-step examples for entering and modifying data on the operating unit.

7 Troubleshooting and fault elimination

7.1 Fault messages

Lists common fault messages, their causes, and recommended remedies.