Lenze EPM-H502 User Manual

Commissioning
Project transfer to the operating unit
Disconnecting from the PC
5

72
EDBPM−H502 DE/EN/FR 5.1
5.2.3 Disconnecting from the PC
How to disconnect from the PC:
1. Switch off the PC.
2. Switch off the supply voltage for the operating unit.
3. Unplug the EPZ−H111 programming adapter from the operating unit and
the EPZ−H110 download cable from the PC.
4. Switch on the supply voltage for the operating unit.
The operating unit is now ready for operation.

Lenze EPM-H502 Specifications

General

Brand	Lenze
Model	EPM-H502
Category	Control Unit
Language	English