5
Safety instrucons
Operang Instrucons i550-Cabinet
1.5 Idencaonoftheproducts
I 5 5 A E xxx x 1 x x x x xxxx
Product type Inverter I
Product family i500 5
Product i550 5
Product generaon Generaon 1 A
Mounng type Control cabinet mounng E
Rated power [hp]
(examples)
0.33 hp 125
10 hp 275
125 hp 390
150 hp 411
Mains voltage and
connecon type
(examples)
1/N/PE AC 120 V A
3/PE AC 230/240 V B
Motor connecons Single axis 1
Integrated funconal
safety
Without safety funcon 0
Basic Safety STO A
Degree of protecon IP20, coated V
Interference suppres-
sion
Without 0
Integrated RFI lter 1
Applicaon Default parameter seng: Region
US (60-Hz networks)
1
Design types
(examples)
Standard I/O without network 000S
Applicaon I/O without network 001S
2 Safetyinstrucons
2.1 Basic safety measures
Disregarding the following basic safety measures may lead to severe personal injury and
damage to property!
• The product:
• must only be used as directed.
• must never be commissioned if they display signs of damage.
• must never be technically modied.
• must never be commissioned if they are not fully mounted.
• must never be operated without required covers.
• must only be disconnected from the installaon in de-energized condion.
• Connect/disconnect all pluggable terminals only in de-energized condion.
• Carry out insulaon resistance tests between 24-V control potenal terminals and PE.
The maximum test voltage must not exceed 110 V DC.
The safety measures are the condion for safe and trouble-free operaon and the achieve-
ment of the specied product features.
The procedural notes and circuit details given in this document are suggesons and their
transferability to the respecve applicaon has to be checked. The manufacturer does not
take responsibility for the suitability of the process and circuit proposals.
The product may cause EMC interferences. The operator is responsible for execung the
interference suppression measures.
To Next Page
General
