Lexicon MC-8 User Manual

Setup Lexicon
3-2
SETUP
Selecting SETUP from the MAIN MENU opens the SETUP menu.
INPUTS
Prompts the selection of a desired input (e.g., DVD1) and opens the
corresponding INPUT SETUP menu, which is used to change input
names, assign audio and video input connectors, select preferred
listening modes and configure Main Zone and Zone 2 input settings.
See “INPUT SETUP” on page 3-4 for more information.
SPEAKERS
Opens the SPEAKER SETUP menu, which is used to configure the
Main Zone audio output connectors for the desired speaker setup,
set speaker distances and calibrate output levels. See “SPEAKER
SETUP” on page 3-22 for more information.
REAR PANEL CONFIG
Opens the REAR PANEL CONFIG menu, which is used to configure
the analog audio input connectors as eight stereo connectors, one
5.1-channel and five stereo connectors, or two stereo and two
5.1-channel connectors. See “REAR PANEL CONFIG” on page 3-59
for more information.
DISPLAYS
Opens the DISPLAY SETUP menu, which is used to customize the on-
screen and front-panel displays, restore audio/video synchronization,
and create and activate a custom unit name. See “DISPLAY SETUP”
on page 3-61 for more information.
VOLUME CONTROLS
Opens the VOLUME CONTROL SETUP menu, which is used to configure
Main Zone, Zone 2, and Mute volume levels. See “VOLUME CONTROL
SETUP” on page 3-66 for more information.
TRIGGER
Open the TRIGGER SETUP menu, which is used to configure the
trigger output connector labeled 1. See “TRIGGER SETUP” on
page 3-67 for more information.
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
LIVE! CALIBRATION
SETUP INPUTS
SPEAKERSSETUP
REAR PANEL CONFIGSETUP
DISPLAYSSETUP
VOLUME CONTROLSSETUP
TRIGGERSETUP

Lexicon MC-8 Specifications

General

Brand	Lexicon
Model	MC-8
Category	Controller
Language	English