SIMPLINK Setup
• When the SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage.
• Device ID: S ets the ID of the device connected via CEC wiring. You can choose a value between 'All' and 'E'.
• StandBy: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as
follows:
Send Receive
Send Only O X
Receive Only X O
All O O
Local Dimming
• Sets whether to use the Local Dimming feature.
• You can set this option to On or Off.
• If set to On, Local Dimming is enabled.
• If set to Off, Local Dimming is disabled.
• If Local Dimming is set to Off on a model that supports the Local Dimming feature, the screen's brightness and
darkness may not display properly.
Holiday Schedule
• Sets the holidays when the product will not be used.
• Holidays are specified according to your schedule(s).
• You can set this option to On/Off.
• Holiday Schedule is disabled if the current time is not set.
• You can add up to 7 schedules.
• Duplicate schedules cannot be added.
• The On Timer does not work during the period set in Holiday Schedule.
Easy Brightness Control
• Adjusts the backlight according to the schedule you set.
• You can set this option to On/Off.
• Easy Brightness Control is disabled if the current time is not set.
• You can add up to 6 schedules, and they are sorted in ascending order by time.
• You can edit a schedule by selecting it from the list and pressing the OK button.
NOTE
• To revert to the default settings, either go to [Admin] [Reset to Initial Settings] or [Admin] [Factory Reset].
ENGLISH
16
To Next Page
Loading...
Need help?
General
