Analog Signage BLU Setting
• Sets the function to control the Analog Signage BLU.
• On/Off Time Setting: Adjusts the schedule of the BLU.
• BLU Manual On/Off: Use the On or Off setting to set the BLU to On or Off without being associated with the
schedule function.
Crestron
• This function enables synchronization with applications provided by Crestron.
• Server: This menu sets the server's IP address for the network connection with the server (equipment provided by
Crestron).
• Port: This menu sets the port for the network connection with the server. The default port number is 41794.
• IP ID: This menu sets a unique ID for synchronizing with the application.
Enterprise Settings
• Enter your company account code to apply the corresponding enterprise settings.
• When your code has been entered, the monitor set gets reset, thereby applying the corresponding enterprise
settings.
• This feature does not get activated if a code has already been entered.
No Signal Image
• It changes the image that is output when there is no signal. If you set this feature to off, the no signal image is not
displayed.
ENGLISH
17
To Next Page
Loading...
Need help?
General
