4. Operation HDMI20-OPTC series – User's Manual 26
Health Menu
Operation Submenu
The following information is displayed about
the transmitter unit in this menu:
▪ Uptime: the elapsed time since the last
booting.
▪ Operation time: displays the summary
of the operation hours.
Temperatures Submenu
This submenu gives a feedback about the current temperatures of the
internal parts in the unit:
▪
Voltages Submenu
The following information is displayed in Voltages Submenu:
▪
Remote Menu
ATTENTION! This settings related to the connected receiver.
Adjustable parameters of the receiver:
Conversion Submenu
The following conversion modes can be set in the receiver:
▪ Off
▪ YUV 4:2:0
▪
▪
See more details about this mode in Output Conversion Modes
section.
OPERATION
> Uptime
0 days 02:33:23
Operation Time
5 days 06:12:44
« Back
HDMI20-OPTC-TX220-Pro
MAIN MENU
> System Settings
Ports
EDID
Health
Remote
HDMI20-OPTC-RX220-Pro
Output 1/A +5V, Output 1/B +5V, Output 2 +5V Submenu
▪ Always on
▪ Always off
▪ Auto
All the LEDs on the receiver unit are turned off 60 seconds after
the dark mode.
Network Submenu
The parameters of the receiver's network
connection can be set in this submenu.
IP, Subnet, Gateway and MAC parameters
show the current settings. If the DHCP
option is disabled, three more parameters
are listed which can be set for a static IP
address:
▪ Static IP,
▪ Static Subnet,
▪ Static Gateway.
ATTENTION! If you change the network settings, always press the
Save option under Network menu (not only in the submenu of the
parameter) to apply the new settings.
NETWORK
> IP
192.168.0.102
Subnet
255.255.255.0
« Back
Save
To Next Page
Loading...
Need help?
General