Step 2. Set the desired update setting in the
Options section.
▪ If you do not want to check for the
updates automatically, uncheck the circle,
which contains the green tick.
▪ If you want to postpone the update, a
reminder can be set with different delays
from the drop down list.
▪ If the proxy settings traverse the update
process, set the proper values then click
the OK button.
Step 3. Click the Download update button to start the upgrading.
The updates can be checked manually by clicking the Check now button.
6.2. Establishing the connection
Step 1. Connect the device to a computer via USB, RS-232 or Ethernet.
Step 2. Run the controller software; device discovery window appears automatically.
Device discovery window in LDC
Step 3. Select the unit from the discovered Ethernet devices or under USB devices; when
the device is connected through RS-232 click on the Query button next to the desired
serial port to display the device’s name and serial number. Double click on the
transmitter or select the device and click on the green Connect button.
ATTENTION!
When the device is connected via the local RS-232 port, make sure that Control mode and
LW3 protocol are set on the serial port.
HDMI-3D-OPT-TX200 series
User’s manual
Software control Page 31 / 106
To Next Page
Loading...
Need help?
General