Lightware SW4-OPT-TX240RAK User Manual

8.10. EDID management
8.10.1. Query the emulated EDIDs
Command format: GET●/EDID.EdidStatus
Response format: pr●/EDID.EdidStatus=<E_loc>:<E
1
>;<E_loc>:<E
2
>;…;<E_loc>:<E
n
>
Example:
˃ GET /EDID.EdidStatus
˂ pr EDID.EdidStatus=D1:E1;D1:E2;D1:E3;D1:E4
Explanation:
All emulated EDID memories (inputs) are listed with the EDID number that is currently
emulated on the input separated by semicolons. Port numbers are listed in section 11.7 on
page 105.
8.10.2. Query the validity of a dynamic EDID
Command format: GET●/EDID/D/D
n
.Validity
Response format: pr●/EDID/D/D
n
.Validity=true|false
Example:
˃ GET /EDID/D/D1.Validity
˂ pr EDID/D/D1.Validity=true
Explanation:
The ‘Validity’ property is true, valid EDID is stored in D1 memory place.
8.10.3. Query the preferred resolution of an user EDID
Command format: GET●/EDID/U/U
n
.PreferredResolution
Response format: pr●/EDID/U/U
n
.PreferredResolution=<preferred_resolution>
Example:
˃ GET /EDID/U/U2.PreferredResolution
˂ pr EDID/U/U2.PreferredResolution=1920x1080p60.00Hz
INFO
Use the "Manufacturer" property to query the manufacturer and the "MonitorName" property
to query the name of the monitor.
8.10.4. Emulating an EDID to an input port
Command format: CALL●/EDID:switch(<source>:<destination>)
Response format: mO●/EDID:switch
Example:
˃ CALL /EDID:switch(F49:E2)
˂ mO /EDID:switch
Legend:
<source>: Source EDID memory place: Factory / User / Dynamic.
<destination>: The emulated EDID memory of the desired input port.
HDMI-3D-OPT-TX200 series
User’s manual
LW3 programmers' reference Page 85 / 106

Lightware SW4-OPT-TX240RAK Specifications

General

Brand	Lightware
Model	SW4-OPT-TX240RAK
Category	Extender
Language	English