5. Device Concept UCX series – User's Manual 30
A presenter can choose what cable(s) are appropirate to their BYOD. Either USB Type-C cable alone for both
USB and Displayport, or one USB cable (USB-B or USB-C) for data and one HDMI cable for video can be used.
The Taur UCX series device will switch both USB and video layers accordingly.
Cable cubby for BYOD #1 has three cables connecting to USB-C (In1), USB-B (In3), HDMI (In3).
Case 1.
Case 2.
HDMI OUT 1
UCX-4x2-HC30
AUDIO
OUT
OUT 2
HDMI USB-B
USB
CONTROL
SERVICE
IN 4
INPUT SELECT
HDMI USB-B
IN 3
SERVICE
USB-C USB-C
OUT1
VIDEO
IN 1 IN 2
BYOD laptop 1.
Cable cubby
HDMI for video
USB-B for data
USB-C IN 1
HDMI IN 3
USB-B IN 3
Monitor 1.
HDMI OUT 1
UCX-4x2-HC30
AUDIO
OUT
OUT 2
HDMI USB-B
USB
CONTROL
SERVICE
IN 4
INPUT SELECT
HDMI USB-B
IN 3
SERVICE
USB-C USB-C
OUT1
VIDEO
IN 1 IN 2
BYOD laptop 1.
Cable cubby
HDMI for video
USB-C for data
USB-C IN 1
HDMI IN 3
USB-B IN 3
Monitor 1.
The individual input settings are the following:
O1: I1 priority:1; I2 priority: disabled; I3 priority:2; I4 priority: disabled; I5 priority:3
Automatic Input Selection - Example 3.
The laptop on HDMI input 4 will be automatically switched to the HDMI output if there is no other source
connected to the switcher. If the PC is powered on and has active video signal, the HDMI input 3 will be
to the HDMI output – independent of the presence of the other video signals.
the lowest number
means the highest priority):
Source device Input port Priority
I4 (HDMI in 4) 3
PC I3 (HDMI in 3) 2
I1 (USB-C in 1) 1
section.
Automatic Input Selection - Example 4.
DIFFERENCE:
Laptop
Projector
BYOD laptop
PC
HDMI OUT 1
USB-C IN 1
HDMI IN 4
HDMI IN 3
UCX-4x2-HC30
AUDIO
OUT
OUT 2
HDMI USB-B
USB
CONTROL
SERVICE
IN 4
INPUT SELECT
HDMI USB-B
IN 3
SERVICE
USB-C USB-C
OUT1
VIDEO
IN 1 IN 2
HDMI OUT 1
UCX-4x2-HC30
AUDIO
OUT
OUT 2
HDMI USB-B
USB
CONTROL
SERVICE
IN 4
INPUT SELECT
HDMI USB-B
IN 3
SERVICE
USB-C USB-C
OUT1
VIDEO
IN 1 IN 2
Monitor 1.
Welcome
screen
To Next Page
Need help?
General
