Logitech Harmony Ultimate
17
Copying setup information from another Harmony remote
If you have a previous Harmony remote such as Harmony One, Harmony 1100 or Harmony 880, you can reuse the
device and Activity settings from that remote to program your Harmony Ultimate. If you do not have a previous
Harmony remote, skip to the Adding Devices section below.
To copy a previous Harmony remote’s settings, click the Copy button shown below. You will be asked to enter the
ID and password for your previous account. When you do, the settings will be copied and applied to your Harmony
Ultimate account.
Once your settings are copied, you will be able to add more devices or Activities and modify your settings.
Adding Devices
To add devices during setup, enter the manufacturer and model number when prompted:
Carefully enter the manufacturer or brand of your first device followed by the model number. Harmony will
automatically correct for common errors such as zeros or ones being confused for the letters '0' or 'I' and will
provide suggestions if the entered device cannot be found.
Serial numbers found on your devices should not be entered as they are unique and cannot be used to identify the
device you have. It is important to enter manufacturer and model information correctly because not doing so may
cause devices to change to the wrong input, miss commands, or not function at all during Activities.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
