Logitech Harmony Ultimate
36
the upper right corner of the website.
Syncing your hub to MyHarmony
When connected to your home Wi-Fi network, the Harmony hub automatically synchronizes to any changes made
on MyHarmony. No special sync procedure is required.
Adding or deleting Devices
Adding a Device
1. Select the Devices tab on the left hand side of the screen.
2. Click Add Device. The Add Device page displays.
3. Carefully enter the manufacturer or brand of your device.
4. Carefully enter the model number.
NOTE: Harmony will automatically correct for common errors such as zeros or ones being confused
for the letters '0' or 'I' and will provide suggestions if the entered device cannot be found.
NOTE: Serial numbers found on your devices should not be entered as they are unique and cannot be
used to identify the device you have. It is important to enter manufacturer and model information
correctly because not doing so may cause devices to change to the wrong input, miss commands, or
not function at all during Activities.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
