12
Energy saving mode
If you do not use the appliance for an
extended period, it automatically switches
to energy-saving mode. All displays go
out and Start/Reload ashes.
Energy-saving mode ends when you use
the appliance again, e.g. if you open or
close the door.
INSTALLATION AND
CONNECTION
Here you will learn where the best place
to install your appliance is. In addition,
you will learn how to connect your
appliance to the water supply and to the
mains.
Unpacking the appliance
Note: Please read the information in the
“Safety” and “Preventing material damage”
sections to ensure that you use the
appliance safely.
ATTENTION!
Objects remaining in the drum that are
not designed for operation with the
appliance may cause material damage
and damage to the appliance.
- Remove these objects, along with all
supplied accessories, from the drum
before starting the appliance.
1. Remove any packaging and protective
covers completely from the appliance.
For the environmentally friendly
disposal of the packaging materials,
observe the information on the topic of
→ “Disposing of packaging”.
2. Check the appliance for visible
damage.
3. Open the door.
→ “Basic operation”
4. Remove the accessory from the drum.
5. Close the door.
To Next Page
Loading...
Need help?
General
