LORD W1 User Manual

50
Fault Cause Troubleshooting
The unbalanced load
detection system has
interrupted the spin
cycle because the
laundry is unevenly
distributed.
• Redistributethelaundryinthedrum.
Note:Wherepossible,mixlargeandsmall
items in the drum. Dierent sized items
of laundry distribute themselves better
during the spin cycle.
• StarttheSpin

programme.
Unbalance load
detection system is
using a reduced spin
speed to eliminate an
unbalance.
• Redistributethelaundryinthedrum.
Note:Wherepossible,mixlargeandsmall
items in the drum. Dierent sized items
of laundry distribute themselves better
during the spin cycle.
• StarttheSpin

programme.
Detergent residue on
the damp washing.
Detergents may
contain water-insoluble
substances that deposit
on the laundry.
• StarttheRinse programme.
Detergent residue on
the dry laundry.
Detergents may
contain water-insoluble
substances that deposit
on the laundry.
• Brushoutthelaundryafterwashingand
drying.
Leaking
Fault Cause Troubleshooting
Waterisleakingoutat
the water inlet hose.
Waterinlethoseis
not correctly/securely
connected.
1. Connect the water supply hose
correctly. Connecting the water inlet
hose
2. Tighten the screw connection.
Waterisleakingoutat
the water outlet hose.
The water outlet hose is
damaged.
• Replacethedamagedwateroutlet
hose.
Wateroutlethoseisnot
connected correctly.
• Connectthewateroutlethosecorrectly.
Wateroutletconnectiontypes.
Smell
Fault Cause Troubleshooting
Odours have formed
in the appliance.
Humidity and detergent
residue may promote
the formation of
bacteria.
• → “Cleaning the drum”
• Ifyouarenotusingtheappliance,leave
the door and detergent drawer open so
that residual water can evaporate.

LORD W1 Specifications

General

Brand	LORD
Model	W1
Category	Washer
Language	English