LORD W1 User Manual

37
Changing the basic settings
1. Set the programme selector to position
1.
2. Press Start - Pause and, at the same
time, turn the programme selector to
position 2.
 The display shows the current value.
3. Set the programme selector to the
required position.
4. To change the value, press Ready in.
5. To save the changes, switch o the
appliance.
CLEANING AND SERVICING
To keep your appliance working eciently
for a long time, it is important to clean
and maintain it carefully.
Tips on appliance care
Follow the tips for appliance care to
ensure your appliance works correctly in
the long term.
Wipedownthe
housing and the
control panel with
nothing but water
and a damp cloth.
The appliance parts
remain clean and
hygienic.
Remove all
detergent residue,
spray residue or
other residues
immediately.
Fresh deposits are
easier to remove
without leaving any
residue.
Keeptheappliance
door and detergent
drawer open after
use.
This allows the
residual water to dry,
reducing odours in
the appliance.
Cleaning the drum
If you often wash at a washing
temperature of 40 °C and lower or the
appliance has not been used for a long
period, clean the drum.
CAUTION
Risk of injury!
Permanently washing at low temperatures
and a lack of ventilation for the appliance
may damage the drum and cause injury.
• Regularlyrunaprogrammefor
cleaning the drum or wash at
temperatures of at least 60 °C.
• Leavetheappliancetodryafterevery
operation with the door open, and
leave the detergent drawer to dry.
• RuntheDrum Clean

programme
without laundry.
Add washing powder.
Cleaning the detergent
drawer
Note: Please read the information in the
“Safety” and “Preventing material damage”
sections to ensure that you use the
appliance safely.
1. Pull out the detergent drawer.

LORD W1 Specifications

General

Brand	LORD
Model	W1
Category	Washer
Language	English