LORD W1 User Manual

16
Connecting the appliance
Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note
• Pleasereadtheinformationinthe
“Safety” and “Preventing material
damage” sections to ensure that you
use the appliance safely.
1. Connect the water inlet hose.


2. Connect the water inlet hose to a tap
(26.4 mm = 3/4”).

!
!
"
#
3. Open the water tap carefully and check
that the connection points are tight.
Water outlet connection types
This information is intended to help you
to connect this appliance to the water
outlet.
Note: Please read the information in the
“Safety” and “Preventing material damage”
sections to ensure that you use the
appliance safely.
ATTENTION!
Whendraining,thewateroutlethoseis
subject to water pressure and may come
loose from the installed connection point.
• Securethewateroutlethoseagainst
unintentional loosening.
Drainage into a
siphon
Secure the
connection point
with a (24–40 mm)
hose clamp.
Drainage into a
washbasin
Fix and secure the
water outlet using
an “elbow.”
Drainage into a
plastic pipe with
rubber sleeve or
into a gully.
Fix and secure the
water outlet using
an “elbow.”

LORD W1 Specifications

General

Brand	LORD
Model	W1
Category	Washer
Language	English