EasyManuals Logo

LS tractor MT225E User Manual

LS tractor MT225E
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #167 background imageLoading...
Page #167 background image
5 -33
5-8. Every 100 hour check
(1) Checking and adding Engine
oil
Oil specification and capacity:
See chapter 5-3, “Lubricants and Capacity” or
the last page in this manual.
Engine oil gauge
Checking engine oil level
- Check and add the engine oil every 100 hours
of operation.
- Check it before starting engine or at 5 minutes
later after stopping engine.
- It must only be checked while the engine is
stopped.
- Check if the oil level is between MAX and MIN
marks of the engine oil gauge. If the engine oil
level is under the minimum mark, add new
engine oil up to the maximum mark as much
as possible.
- If your engine is operated in dusty/dirty condition,
the service interval must be shorter than normal
condition.
The amount of engine oil consumed may vary depending on the operating
conditions. Check the amount of engine oil regularly and if necessary add new
engine oil. Otherwise, the engine can be stuck or broken by engine oil shortage.
Caution
Oil filling inlet
Oil gauge

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LS tractor MT225E and is the answer not in the manual?

LS tractor MT225E Specifications

General IconGeneral
BrandLS tractor
ModelMT225E
CategoryTractor
LanguageEnglish

Related product manuals