3 -21
(5) Four wheel drive lever (4WD)
This lever is used to engage/disengage the four
wheel drive (4WD).
Before operating the 4WD lever, press down the
clutch pedal, brake pedals, and stop the tractor
completely.
Push the lever forward to engage the 4WD and
pull the lever backward to disengage the 4WD.
4WD is very effective in the following cases.
- When increasing the towing power for heavy
work.
- In case of working in sandy soil.
- To prevent tractor from spinning in wet land.
Four wheel
drive lever
4WD
2WD
(6) Middle PTO lever (if fitted)
This lever is used to engage/disengage the
middle PTO gear (optional).
Before operating the middle PTO lever, place
the PTO switch in “OFF” position and wait until
the PTO shaft is stopped completely.
Pull the middle PTO lever upward to engage the
middle PTO gear.
For further information of the middle PTO shaft,
see chapter 4-5-(2) in this manual.
Middle PTO lever
ON
▶ When driving on public roads, disengage the 4WD. If not, it may cause damage of
the transmission drive line and a serious accident.
▶ When driving the tractor at high speed while the 4WD is engaged, sharp steering
may cause an accident.
Caution
To Next Page
Loading...
Need help?
General
