LS tractor MT225E User Manual

3 -19
(1) Main gear shift lever
(Mechanical)
 Four speed gear shift and neutral position is
available.
 The main gear shift lever can be operated while
driving after depressing the clutch pedal. It is not
necessary to stop the tractor completely due to
the synchromesh gears.
Notice
▶Operate the main gear shift
lever by correct “H” pattern. If
operated diagonally, it may
cause a failure.
Main gear
shift lever
4
2
31
Differential
lock pedal
(2) Differential lock pedal
 When the rear wheel is slipping and the tractor
can not move forward, stop the tractor and press
down the differential lock pedal.
 Differential lock is effective for working on a
slippery ground.
 If engaged, both rear wheels will rotate at equal
speed. So, It can disturb the steering operation
and you cannot turn smoothly.
 Take your foot off the pedal to release the
differential lock. If the differential traction force is
reduced to some extend, the differential lock is
released automatically.
 If the differential lock does not disengaged (i.e.
the turning radius is larger than normal condition
and the turning is not smooth), depress the
clutch pedal and/or press the left/right one-side
brake pedal slightly for a second each other.
 This pedal is installed on the step floor, but the
location is;
- the right-hand side for mechanical model
- the left-hand side for HST model.
Mechanical
Differential
lock pedal
HST
▶Do not turn the tractor with pressing the differential lock pedal.
▶Do not use this differential lock pedal while driving on public road.
▶Do not engage the differential lock when one wheel is spinning.
Warning
Mechanical

LS tractor MT225E Specifications

General

Brand	LS tractor
Model	MT225E
Category	Tractor
Language	English