LS tractor MT352 User Manual

3 -38
(1) Range gear shift lever
(Mechanical only)
 Four speed gear shift and neutral position is
available.
 Before operating the range gear shift lever, press
down the clutch pedal, brake pedals, and stop
the tractor completely.
Mechanical
Notice
▶ Operate the range gear shift lever by correct “H” pattern. If operated diagonally, it
may cause a failure.
(2) PTO gear lever (if fitted)
 540 rev/min and neutral position is available.
 When attaching/detaching the rear implement,
place the PTO gear lever to the neutral position.
 Before operating the PTO gear lever, depress
the clutch pedal and put PTO switch to the OFF
position, and stop the PTO shaft completely.
 To engage the 540 rev/min gear, push the PTO
gear lever forward.
 For further information about the PTO shaft, see
chapter 4-5-(2) in this manual.
PTO gear
lever
540rpm
Neutral
Notice
▶ Operate the PTO gear lever by correct “I” pattern. If operated diagonally, it may
cause a failure.
▶If the PTO gear lever is not engaged smoothly, shift the lever again after lifting up
the implement from the ground to align the drive shaft.
Forward
Range gear
shift lever

LS tractor MT352 Specifications

General

Brand	LS tractor
Model	MT352
Category	Tractor
Language	English