LS tractor MT352 User Manual

3 -48
GSP lever
GSP
Independent PTO
(13) Ground Speed PTO (GSP)
lever (if fitted)
 This lever is used to select the ground speed
PTO(GSP) or independent PTO.
 The ground speed PTO rotates proportionally
according to the rear wheel speed. The
independent PTO rotates proportionally
according to the engine speed regardless of the
rear wheel speed.
 If you pull the lever backward, the ground speed
PTO (GSP) is engaged.
 If you push the lever forward fully, the ground
speed PTO (GSP) is disengaged and
independent PTO is available.
 Before operating the GSP lever,
- press a clutch pedal, brake pedals, and stop
the tractor completely.
- put the PTO switch in OFF position and stop
the PTO shaft completely.
Middle PTO lever
ON
(12) Middle PTO lever (if fitted)
 It is used to engage/disengage the middle PTO
gear.
 Before operating the middle PTO lever, put PTO
switch to “OFF” position and stop the PTO shaft
completely.
 Pull the middle PTO lever up to engage the
middle PTO gear.
 For further information about the PTO shaft, see
chapter 4-5-(2) in this manual.

LS tractor MT352 Specifications

General

Brand	LS tractor
Model	MT352
Category	Tractor
Language	English