LS tractor MT352 User Manual

5 -32
(1) Lubricating grease nipple
 Front axle holders. (Front/Rear)
 Steering tie-rod. (Both side)
 3-point linkage.
5-7. Every 50 hour check
Grease nipples
(2) Cleaning of Radiator and Radiator screen
 See chapter 5-6-(7) in this manual (See page 5-25).
1.Wipe dirt from fittings before greasing.
2.Use a grease gun containing clean high grade of
grease.
For grease specification, see chapter 5-3,
“Lubricants and Capacity” or the last page in this
manual.
3.Pump fresh grease into fitting to adequately
lubricate the component and force out any
contamination from the grease passage.
4.Wipe off excess grease.
Grease nipple
(Both side)
Grease nipple

LS tractor MT352 Specifications

General

Brand	LS tractor
Model	MT352
Category	Tractor
Language	English