Mahindra E2O User Manual

1.6 HOOD
1.6 HOOD
I. OPENING THE HOOD
Step 1: Pull hood release lever located
below steering wheel.
Step 2: Locate hood-latch lever under
center of hood with your index
finger. Pull lever towards left side
untill it unlocks from latch.
Step 3: Lift hood and pull support-rod from
its mounted clip on fuse box cover
and place it in center of hood.
Overview
II. CLOSING THE HOOD
Step1: Hold support rod & lift Hood slightly
upwards, place support rod back to its
location.
Step2: Lower hood and press it gently
downwards till it locks with a click noise.
Do not drop hood from height. Ensure that,
hood is fully locked before driving.
NOTE
12
HOOD RELEASE LEVER
+
+
Hood light will be on when hood is
opened and goes off once it is closed.
NOTE
1.7 REAR HATCH / 1.8 CHARGE CABLE COMPARTMENT
Overview
I.7 REAR HATCH
To release rear hatch, press hatch release
button on HVAC control unit. When vehicle
is in locked condition, use remote key fob to
release hatch.
Do not drop the hatch from open
position. Be careful in hatch open /
raised condition as you may get hurt.
CAUTION
13
CLOSING REAR HATCH
Close rear hatch to 3/4 and then gently
drop the hatch down till it locks into
position with a click noise.
Charge cable
compartment
1.8 CHARGE CABLE COMPARTMENT
Compartment in rear is provided to store
your charging cable.
HATCH RELEASE BUTTON

Mahindra E2O Specifications

General

Brand	Mahindra
Model	E2O
Category	Automobile
Language	English