4.2 SEAT ADJUSTMENTS / 4.3 REAR SEAT ACCESS
4.2 SEAT ADJUSTMENTS
I. FRONT SEAT ADJUSTMENTS
For adjusting front seating position that
is most comfortable, a lever is provided
under front side of the seats. To adjust
pull up, hold lever and slide forward or
backward for your requirement and
release lever for locking.
Safety
II. RECLINING THE SEAT REST
To adjust rear back rest to most
comfortable position, a recliner lever
is provided at side of the front seats.
Pull recliner lever upwards and release
it for locking once aligned to desired
position. Recliner lever is located on
right hand side for driver’s seat and
left-hand side of passenger’s seat.
32
4.3 REAR SEAT ACCESS
Rear seats can be accessed from both sides
of vehicle. To do so:
Step 1: Pull up rear recliner lever of front
seat provided at sides.
Step 2: Front seat will slide & seat rest
will recline forward for easy entry
& exit.
Step 3: Make sure front seat is
returned back to normal position
prior to your drive.
Recliner Lever
4.4 SEAT BELTS
Safety
REAR SEAT
A : Tool kit & warning triangle are placed in
rear seat rest pouches.
B: Press release lock and pull head rest for
adjustment.
33
Position of seat backrest should always be
in an upright position when driving, or seat
belt effectiveness may be reduced.
Always adjust seat before driving. Never
attempt to adjust seats or belts while
driving.
CAUTION
REAR SEAT
Tool Kit
Warning Triangle
4.4 SEATBELTS
Both front and rear seats are fitted
with 3-point type safety belts with
retractor for maximum protection
from any inadvertent event.
CORRECT SEAT BELT
POSITION
Front seats are of ELR (Emergency
locking retractor) type. In emergency
situations or crash, retractor instantly
locks securing the occupant and
prevents injury.
To engage seat belt:
! Insert latch plate into the buckle till
click sound is heard & latch engaged.
Make sure belt is securely latched
and check that belt is not twisted.
To Next Page
Loading...
Need help?
General
