Makita DTD152 Technical Information

July 2015
3.3.4. HAMMER SECTION
3.3.4.1. DISASSEMBLING
1. Remove Hammer case section (8-28) from Motor section
(29-33). (See Figure 32
)
2. Remove Bearing box complete (28), O ring 40 (27),
Internal gear 51 (26), Hammer section (17-25), Hammer
case complete section (8-16). (See Figure 7 to Figure 9
)
Figure 32
3. Set 1R045 to Hammer (17).
4. Pull Hammer (17) downward by turning 1R045
counterclockwise.
5. Align the opening for Steel ball insertion* with the top of
Cam grooving on Spindle (23) by turning 1R045.
6. Remove two Steel balls 3.5 (15) with Tweezers or
Magnetic screwdriver.
7. Turn 1R045 clockwise to release Hammer case section.
Figure 33
8. When removing Spindle (23) from Hammer (17), place
Hammer (17) below so that Steel balls 3.5 (15) do not
fall down.
Figure 34
1R045
Top of Cam
grooving
on Spindle (23)
(28)
(27)
(26)
(17-25)
(8-16)
(23)
(15)
(17)
(17)
(23)
(15)
Tweezers
Opening for
Steel ball
insertion*
17 / 27

Makita DTD152 Specifications

General

Power source	Battery
Battery voltage	18 V
Battery level indicator	Yes
Product color	Black, Blue
Idle speed (max)	3500 RPM
Screw diameter (max)	16 mm
Maximum torque (hard applications)	165 N⋅m
Vibration emission	10.5 m/s²

Weight and Dimensions

Depth	137 mm
Width	79 mm
Height	238 mm
Weight	1500 g