Makita DTD152 Technical Information

July 2015
3.2. LUBRICANT AND ADHESIVE APPLICATION
Apply the following lubricants to protect parts and product from unusual abrasion.
Item No. Description Portion to lubricate Lubricant Amount
13 Hammer case complete Inside of Sleeve 14 which touches Anvil (16) Makita grease FA. No.2 a little
16 Anvil Hole into which Spindle (23) top is inserted
18 Steel ball 3.5 (24pcs.) Whole portion
21 Steel ball 5.6 (2pcs.) Whole portion Seal lubricant No.101
23 Spindle (a) Hole into which Armature's drive end is
inserted to engage Spur gear 22 (22)
Makita grease FA. No.2 2g
(b) Drum portion a little
Figure 2
(13)
(16)
(18)
(23)
Sleeve 14 (The component of (13))
(21)
(22)
23 (b)
23 (a)
6 / 27

Makita DTD152 Specifications

General

Power source	Battery
Battery voltage	18 V
Battery level indicator	Yes
Product color	Black, Blue
Idle speed (max)	3500 RPM
Screw diameter (max)	16 mm
Maximum torque (hard applications)	165 N⋅m
Vibration emission	10.5 m/s²

Weight and Dimensions

Depth	137 mm
Width	79 mm
Height	238 mm
Weight	1500 g