Maintenance work on the carrier
7.4 Fuel system
7 - 30 3 302 746 en Maintenance manual
GMK5200-1
09.03.2018
• Remove the cover (1).
• Remove the old filter (2) from the casing.
• Place the old filter (2) in the receptacle.
• Insert a new filter (2) into the casing.
• Attach the cover (1) – torque 55 Nm
(40.5 lbf ft);
à Engine manufacturer's docu-
mentation
.
• Remove the receptacle.
• Open the two tank covers on the fuel tank;
à p. 7 - 27.
• Operate the hand pump (1) until you sense
definite resistance.
• Close the two tank covers on the fuel tank.
• Start the engine and check for leaks.
To Next Page
Loading...
Need help?
General
