Manitowoc Grove GMK 5200-1 User Manual

Maintenance work on the carrier
7.19 Towbar coupling
09.03.2018
Maintenance manual 3 302 746 en 7 - 135
GMK5200-1
7.19 Towbar coupling
Depending on the equipment fitted to your truck crane, it may have towbar
couplings (additional equipment) from different manufacturers.
The wear values for other manufacturers may vary from those specified;
à Separate operating manual.
7.19.1 Lubricating the towbar coupling
This maintenance work is not required if the towbar coupling is connected
to the central lubrication system.
Grease, spare
parts, tools
– Grease gun from the tool set.
H
To avoid over-lubrication, the towbar coupling may only be lubricated when
open.
• Clean the grease nipples (2) and (3).
• Open the towbar coupling. To do this, move
the lever (1) up.
• Press grease into the grease nipples (2)
and (3).
• Close the towbar coupling.
s
M 1
Lubricating
grease
Designation to
DIN 51502
Specification
Classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369
G
Risk of injury when the automatic closing device is triggered.
Do not put your hand into the coupling jaw when the towbar coupling is
open.
This may trigger the automatic closing device, make the cotter pin move
down and seriously injure your hand.

Manitowoc Grove GMK 5200-1 Specifications

General

Brand	Manitowoc
Model	Grove GMK 5200-1
Category	Construction Equipment
Language	English