Part Number STH025 11/16 165
Touch Pad Diagnostics
Follow the control board diagnostics to “Status Passed”.
Perform the following keystrokes on the display.
• Display reads Status Passed, press the right arrow
• Display reads Pass Yes, press the right arrow
• Display reads Key Pad Test, press the right arrow
4. Test the functionality of all buttons on the touch
pad.
NOTE: Pushing the power button will start and stop the
ice machine. Testing it last will allow the ice machine to
continue running a freeze cycle.
• As you press the buttons the first letter of the
corresponding word will flash indicating the push
button is operating correctly or the corresponding
arrow or zero will flash.
• Press the right arrow 5 times rapidly to exit.
To Next Page
Loading...
Need help?
General