Part Number STH025 11/16 77
ICE PROGRAM
To save energy and water, the ice machine can be
programmed to only power up during time periods
that the ice will be used or when the bin level is being
depleted by heavy use.
1. In the Energy Saver menu, ensure that Ice Program is
highlighted.
2. Press the Checkmark. On this screen, you can choose
to turn on the time program (Time Prog) bin level
program (Bin Level) or ice usage program (Ice
Program) by highlighting your choice and pressing
the Checkmark. Selecting one will deselect the other.
If one of them is selected and you wish to turn both
off, highlight the choice and press Checkmark again.
3. If none of the programs are selected, highlighting
Settings and pressing the Checkmark will select the
times, bin level or pounds of ice per day. If one of the
programs is selected, highlight Settings and press
the Checkmark to choose the times or bin levels.
NOTE: For details on how to use the cursor for the
time program, refer to “Display Panel Navigation” in
this section.
4. Select Exit to return to previous screens and again to
the Energy Saver menu.
To Next Page
Loading...
Need help?
General