Part Number STH025 11/16 93
UPGRADING FIRMWARE WITH A FLASH DRIVE
Important
The flash drive must be formatted before using, All
files and software on the flash drive are removed
during the formatting process. Refer to page 95 USB
Flash Drive Specifications and Formatting.
1. Drag and drop the files from website or email onto a
flash drive.
2. Ensure that the ice machine’s power is on.
3. Press the Menu button.
4. Press the Down arrow until Service is highlighted.
5. Press the Checkmark. The Service menu will be
displayed.
USB Setup USB Stick Download Frm
6. Press the Down arrow until USB Setup is highlighted.
7. Press the Checkmark. USB Stick will appear
highlighted.
8. Press the Checkmark again. A submenu with
Download Frm (Download Firmware) appears.
9. Ensure that Download Frm is highlighted and press
the Checkmark. A display of instructions will appear.
To Next Page
Loading...
Need help?
General