168 Part Number STH025 11/16
5. Scroll down until brackets are in the space below
“Input Model #”. Press the right arrow to activate
the blinking cursor, then use the up/down arrows
to select the first character in the model number.
Use the right arrow to move to the next space. Add
characters in this manner until the model number
is complete. The model must include the dash and
the last three numbers to indicate the electrical
requirements ( example -261). Press the right arrow
until the cursor disappears.
6. Scroll down until brackets are in the space below
“Input Serial#”. Press the right arrow to activate the
blinking cursor, then use the up/down arrows to
select the first character in the serial number. Use
the right arrow to move to the next space. Add
characters in this manner until the serial number
is complete. Press the right arrow until the cursor
disappears.
7. Scroll down and select exit, then press checkmark.
8. Reboot ice machine by disconnecting power for a
minimum of 15 seconds, then reapply power.
To Next Page
Loading...
Need help?
General