Manitowoc MLC100-1 Service And Maintenance Manual

POWER TRAIN MLC80A-1/MLC90A-1/MLC100A-1/MLC100-1 SERVICE/MAINTENANCE MANUAL
7-6
Published 10-09-2020, Control # 259-06
ENGINE CONTROLS
See the engine start procedure in Section 3 of the Operator
Manual for engine startup. See the Cummins engine manual
for detailed engine instructions.
The engine is started and stopped with the engine key
switch.
The speed of the crane motors and actuating cylinders
depends on engine speed and equipment control handle
movement. Engine speed is controlled with the hand or foot
throttle. Node 1 controller and engine node 0 controller
process and control engine information, which is shown on
the main display.
The emergency stop push button stops the engine in an
emergency. All brakes apply, and any functions stop
abruptly.
ENGINE ACCESS PANELS
The engine enclosure has two access panels that can be
removed to allow access for engine service.
The grating over the radiator and the covers over the
exhaust aftertreatment assembly can also be removed.
WARNING
Personal Injury or Equipment Damage Hazard!
Personal injury can occur from contact with moving
engine components. Equipment damage can occur if all
components are not tightened securely.
Do not operate the crane without the access panels,
grating, and covers in place and all the fasteners secure.
WARNING
Personal Injury Hazard—Heavy Objects!
Engine access panels are heavy. To prevent serious
injury, use the appropriate lifting equipment when lifting or
removing these objects.
FIGURE 7-5
Item Description
1 Outboard Access Panel
2 Inboard Access Panel
FOR REFERENCE
ONLY

Manitowoc MLC100-1 Specifications

General

Brand	Manitowoc
Model	MLC100-1
Category	Construction Equipment
Language	English