HYDRAULIC SYSTEM MLC80A-1/MLC90A-1/MLC100A-1/MLC100-1 SERVICE/MAINTENANCE MANUAL
2-2
Published 10-09-2020, Control # 259-06
Pump 1
Pump 1 (Figure 2-2) is a dual 107 cc, variable-displacement
pump. Displacement is controlled by an electronic
displacement control (EDC).
Each pump has a maximum operating pressure of 350 bar
(5075 psi).
Item Description
1 Priming Port R3 (start up)
2 Pump 4 Low Pressure Port A3
3 Suction Port S
4 Pressure Port A1
5 Pressure Port A2
6 Pressure Port M2
7 Pressure Port M1
8 Pump 2 Drive
FIGURE 2-2
To Next Page
Loading...
Need help?
General
