Manitowoc MLC100-1 Service And Maintenance Manual

©2020 Manitowoc
Published 10-09-2020, Control # 259-06
SERVICE/MAINTENANCE MANUAL
This manual is divided into the following sections:
SECTION 1 INTRODUCTION
SECTION 2 HYDRAULIC SYSTEM
SECTION 3 ELECTRICAL SYSTEM
SECTION 4 BOOM
SECTION 5 HOISTS
SECTION 6 SWING SYSTEM
SECTION 7 POWER TRAIN
SECTION 8 UNDERCARRIAGE
SECTION 9 LUBRICATION
SECTION 10 ACCESSORIES
NOTICE
The serial number of this crane is the only method your Manitowoc dealer or the
Manitowoc Crane Care Lattice Team has of providing you with correct parts and service
information.
The serial number is located on a crane identification plate attached to the operator’s
cab. Refer to the Nameplate and Decal Assembly Drawing in Section 2 of this manual
for the exact location of the crane identification plate.
Always furnish serial number of crane when ordering parts or discussing service
problems with your Manitowoc dealer or the Manitowoc Crane Care Lattice Team.
To prevent death or serious injury:
• Avoid unsafe operation and maintenance.
Crane and attachments must be operated and maintained by trained and
experienced personnel. Manitowoc is not responsible for qualifying these
personnel.
• Do not operate or work on crane or attachments without first reading and
understanding instructions contained in Operator Information Manual and
Service Manual supplied with crane and applicable attachments.
• Store Operator Information Manual and Service Manual in operator’s cab.
If Operator Information Manual or Service Manual is missing from cab,
contact your Manitowoc dealer for a new one.
WARNING
This manual has been prepared for and is considered part of -
MLC80A-1/MLC90A-1/MLC100A-1/MLC100-1
Crane Model Number
XXXXXRef
Crane Serial Number
1
4
5
6
7
8
2
3
9
10
FOR REFERENCE
ONLY

Manitowoc MLC100-1 Specifications

General

Brand	Manitowoc
Model	MLC100-1
Category	Construction Equipment
Language	English