Manitowoc MLC100-1 User Manual

SAFETY INFORMATION MLC90A-1/MLC100-1 OPERATOR MANUAL
2-6
Published 12-10-19, Control # 258-05
OPERATOR MANUAL/CAPACITY CHART
STORAGE
General
Manitowoc provides the following manuals and other
important literature with your crane:
• Operator Manual (Serial Numbered)
Contains safety information, crane specifications,
assembly/erection procedures, operating instructions,
lubrication and maintenance checks.
• Parts Manual (Serial Numbered)
Contains illustrations and part numbers of replaceable
parts.
• Capacity Chart Manual (Serial Numbered)
Contains lifting capacities and related information (wire
rope specifications, drum and lagging information, etc.)
• Maintenance Checks and Lube Guide
Contains lists of maintenance checks and lube services
and their prescribed intervals.
• RCI/RCL Operation
Contains rated capacity indicator and/or rated capacity
limiter operation, limits, and calibration procedures.
• Service Manual (Serial Numbered)
Contains theory of operation, maintenance procedures,
crane and wire rope inspection procedures,
troubleshooting information, and shop procedures.
The manuals which must be retained in the operator cab
(Operator Manual, Capacity Charts, Maintenance Checks
and Lube Guide, and RCL Operation) are supplied in an
OPERATOR INFORMATION binder.
The Operator Manuals and Capacity Charts are stamped
with the serial number of the crane or attachment. The serial
number on the manuals and capacity charts must match the
serial number of the crane. Using any other manual or
capacity chart is prohibited.
The crane model and serial number are located on the Crane
Identification Plate on the crane cab.
If the serial numbers of your manuals and capacity charts do
not match the serial numbers of the crane, contact your
Manitowoc dealer for the proper manual or capacity charts.
Do not operate the crane if the proper Capacity Chart is
not in the cab.
Storing Manuals
See Figure 2-2.
Store the Operator Information binder in the holder (1)
located behind the seat (2) in the left rear corner of the
operator cab.
Attach the chain from the manual to the link (3) on the holder.
Keep all other manuals provided with the crane in the crane
owner’s/user’s office so they are readily available when
needed.
Additional storage is provided on the storage shelves (4).
WARNING
Fall Hazard!
To prevent falling from any height during crane assembly
and disassembly, personnel shall appropriate wear fall-
protection equipment.
Figure 2-2. Manual Holder in Cab
Item Description
1Holder
2Seat
3Link
4 Storage Shelves

Manitowoc MLC100-1 Specifications

General

Brand	Manitowoc
Model	MLC100-1
Category	Construction Equipment
Language	English