OPERATING CONTROLS AND PROCEDURES MLC90A-1/MLC100-1 OPERATOR MANUAL
3-14
Published 12-10-19, Control # 258-05
Right Console
Table 3-5. Right Console
Item Name Description
1 Emergency Stop Button
When this button is depressed, the crane engine shuts off,
the brakes apply, and the currently operated crane
functions come to a complete stop.
For normal engine shut down, use the engine ignition
switch.
NOTE The button must be pulled up before the engine can
be restarted.
If the emergency stop switch has been activated
while functions were being operated, test the
corresponding disk brakes for proper operation
before putting the crane back into service.
To Next Page
Loading...
Need help?
General
